Air-Coupled Surface Wave Transmission Measurement Across A Partially Closed Surface-Breaking Crack In Concrete

Previous researchers have demonstrated that the transmission of surface waves is effective to estimate the depth of a surface-breaking crack in solids. However, most of the results were obtained using a well-defined crack (or notch) in laboratory. In fact, there is a critical gap to apply the theory to surface-breaking cracks in concrete structures subjected to external loadings where the cracks are generally ill-defined, and partially closed. In this study, the authors investigated transmission coefficients of surface waves across a partially closed surface-breaking crack in concrete subjected to monotonically increasing compressive loadings. First, a concrete beam (0.5 X 0.154 X 2.1 m(3)) having two surface-breaking cracks with various crack widths was prepared in laboratory. Second, transmission coefficients of impact-induced surface waves were measured across a surface-breaking crack in the concrete beam with increasing compressive loadings from 0 to 140kN (10% of the ultimate compressive strength of the concrete beam). External post-tensioning was used to apply the compression. For comparison purpose, sensitivity of surface wave velocity to compressive loading was also investigated. As a result, observations in this study reveal that transmission coefficient is a more sensitive acoustic parameter than phase velocity to evaluate a surface-breaking cracking in concrete subjected to compressive loadings.Civil, Architectural, and Environmental Engineerin

A 0.18μm CMOS 300MHz Current-Mode LF Seventh-order Linear Phase Filter for Hard Disk Read Channels

“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”A 300MHz CMOS seventh-order linear phase gm-C filter based on a current-mode multiple loop feedback (MLF) leap-frog (LF) structure is realized. The filter is implemented using a fully-differential linear operational transconductance amplifier (OTA) based on a source degeneration topology. PSpice simulations using a standard TSMC 0.18μm CMOS process with 2.5V power supply have shown that the cut-off frequency of the filter can be tuned from 260MHz to 320MHz and dynamic range is about 66dB. Group delay ripple is approximately 4.5% over the whole tuning range and maximum power consumption is 210mW

A 0.18μm CMOS 9mW current-mode FLF linear phase filter with gain boost

“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”The design and implementation of a CMOS continuous-time follow-the-leader-feedback (FLF) filter is described. The filter is implemented using a fully-differential linear, low voltage and low power consumption operational transconductance amplifier (OTA) based on a source degeneration topology. PSpice simulations using a standard TSMC 0.18 mum CMOS process with 2 V power supply have shown that the cut-off frequency of the filter ranges from 55 MHz to 160 MHz and dynamic range is about 45 dB. The group delay is less than 5% over the whole tuning range; the power consumption is only 9 mW

NAM: Non-Adversarial Unsupervised Domain Mapping

Several methods were recently proposed for the task of translating images between domains without prior knowledge in the form of correspondences. The existing methods apply adversarial learning to ensure that the distribution of the mapped source domain is indistinguishable from the target domain, which suffers from known stability issues. In addition, most methods rely heavily on `cycle' relationships between the domains, which enforce a one-to-one mapping. In this work, we introduce an alternative method: Non-Adversarial Mapping (NAM), which separates the task of target domain generative modeling from the cross-domain mapping task. NAM relies on a pre-trained generative model of the target domain, and aligns each source image with an image synthesized from the target domain, while jointly optimizing the domain mapping function. It has several key advantages: higher quality and resolution image translations, simpler and more stable training and reusable target models. Extensive experiments are presented validating the advantages of our method.Comment: ECCV 201

3-D Microwave Imaging for Breast Cancer

We introduce a novel microwave imaging technique for breast cancer detection. Our approach provides a one-pass inverse image solution, which is completely new and unprecedented, unrelated to tomography or radar-based algorithms, and unburdened by the optimization toil which lies at the heart of numerical schemes. It operates effectively at a single frequency, without requiring the bandwidth of radar techniques. Underlying this new method is our unique Field Mapping Algorithm (FMA), which transforms electromagnetic fields acquired upon one surface, be it through outright measurement or some auxiliary computation, into those upon another in an exact sense

Weak-Light, Zero to -\pi Lossless Kerr-Phase Gate in Quantum-well System via Tunneling Interference Effect

We examine a Kerr phase gate in a semiconductor quantum well structure based on the tunnelling interference effect. We show that there exist a specific signal field detuning, at which the absorption/amplification of the probe field will be eliminated with the increase of the tunnelling interference. Simultaneously, the probe field will acquire a -\pi phase shift at the exit of the medium. We demonstrate with numerical simulations that a complete 180^\circ phase rotation for the probe field at the exit of the medium is achieved, which may result in many applications in information science and telecommunication